>
Product overview of Finder Relays 55.13.9.024.0000
The Finder 55.13.9.024.0000 electromagnetic relay embodies a flexible solution for industrial and electrical automation frameworks requiring dependable signal and load switching. At the core of its architecture is the 3PDT contact system, arranged as three independent form C changeover outputs. This configuration enables parallel or segregated control of multiple circuits, delivering design latitude for automation panels, power distribution units, or interlocking safety logic. The 10 A per pole current tolerance, paired with tight switching differentials, supports not only signal-level operations but also direct actuation of moderate power devices such as solenoid valves, motor contactors, and resistive loads.
Mechanistically, coil excitation at 24 VDC drives the armature, ensuring rapid and repeatable contact transition. The relay’s operating thresholds are calibrated for immunity to voltage drift and electromagnetic interference, traits crucial for electrically noisy environments. The through-hole PCB package simplifies both automated and manual assembly, promoting serviceability and modular retrofit within high-density control racks. Thermal performance is enhanced by optimized internal air gaps and contact spacing, mitigating de-rating under sustained high current cycles. Such architecture extends relay lifespan in applications involving frequent switching or inductive load surges, a frequent challenge in distributed motor control and sequencing tasks.
Use of silver-nickel (AgNi) alloy at contact interfaces addresses dual imperatives: high conductivity for consistent load transfer, and resistance to both oxidation and welding under arcing conditions often encountered with mixed AC/DC loads. This material selection, in tandem with precise contact actuation geometry and wiping movement, reduces the risk of micro-welds and contact bounce, thus supporting longevity in cycles exceeding the mechanical norm for similarly-rated relays. Integration testing in applications such as conveyor automation lines and HVAC plant controllers confirms stable performance across wide ambient temperature intervals, even where supply voltage sags or minor transients are commonplace.
From a standards and global compliance perspective, the assortment of certifications—CCC, CSA, cURus, EAC, ENEC, RINA, VDE—validate the 55.13.9.024.0000’s fitness for installation in regulated markets, supporting straightforward adoption in both export-oriented and domestic manufacturing projects. This multi-standard endorsement expedites project approval cycles and reduces risk of late engineering changes. A frequently underappreciated dimension is the relay’s versatility in bridging legacy electromechanical systems with modern PLC architectures, offering backward compatibility while enabling future-proofing for phased digitalization initiatives.
Analytically, the value of the Finder 55.13.9.024.0000 lies in blending robust mechanical endurance with electrical versatility, optimizing both total cost of ownership and system reliability. By emphasizing durable material specifications, precision contact dynamics, and cross-border regulatory acceptance, this relay secures a niche in mission-critical and general-purpose roles, maximizing lifecycle return through targeted engineering refinement.
Electrical and contact specifications of Finder Relays 55.13.9.024.0000
Finder Relays 55.13.9.024.0000 employs an electromechanical contact system engineered for robust performance in both general and industrial switching environments. The relay’s contacts are specified for a nominal continuous current of 10 A, with surge capability up to 20 A for transient load events. This margin between nominal and peak handling allows for reliable operation under brief overloads, a desirable characteristic in control panels where unpredictable inrush currents may occur. With a maximum switching voltage of 400 VAC, the relay provides the versatility required for integration into both single-phase and three-phase AC power circuits, frequently encountered in building automation or machine control modules.
Switching power is rated up to 4000 VA, allowing efficient disconnection or connection of substantial resistive and moderately inductive loads. The AC1 rating of 2500 VA at 250 VAC is optimized for standard resistive loads, while an AC15 category rating of 500 VA at 230 VAC addresses the demands of switching electromagnetic devices like contactor coils—typical in motor control circuits. This distinction in ratings reflects contact material engineering and arc quenching methods tailored for the specific wear characteristics induced by different load types.
For direct current loads, the relay demonstrates dependable performance at 10 A and 24 V DC. However, due to inherent arc persistence in DC, the breaking capacity reduces to 0.5 A at 110 V DC and 0.25 A at 220 V DC. These values are indicative of careful contact gap design and optimized material choices, ensuring minimal contact erosion during arc interruption. In practical process automation applications, this positions the relay for reliable low-voltage DC switching, such as control solenoids or pilot device circuits, while discouraging use in high-voltage DC switching unless paralleled for current sharing or with auxiliary arc extinction measures.
The minimum switching load threshold of 300 mW (5 V / 5 mA) enables compatibility with sensitive instrumentation, providing precise control even of low-energy monitoring or signal circuits where other relays’ higher minimums would lead to unreliable switching. This is achieved by contact geometry and precious metal surfacing minimizing oxidization and contact resistance at lower power levels.
A 3PDT (three-pole double throw) configuration with micro-disconnection ensures simultaneous multipole switching, supporting fail-safe interlocking or signal inversion logic frequently needed in safety relay chains and machine interlocks. The micro-disconnection design reduces electrical noise during actuation, minimizing momentary bounce artifacts in feedback or signal lines—a critical factor in high-reliability PLC-driven systems.
Insulation coordination is a cornerstone of the relay’s design. With a dielectric strength of 1000 VAC between open contacts and 4000 VAC between coil and contacts, the device tolerates substantial voltage transients without breakdown. This resilience under surge conditions extends relay lifespan in exposed installations such as switchboards or field enclosures, where intermittent overvoltages are common.
In deployment, successful outcomes are tied to careful observance of contact load ratings, not only generic switching capacity but also load type classification. Underrating for inductive loads can lead to premature contact wear due to increased arcing. It is advisable, for instance, to consider derating curves provided by the manufacturer, especially when switching loads near the device’s DC maximums. In practical terms, applying these relays in modular DIN systems with snubber networks across inductive loads further extends service life and ensures stable operation. Advanced users deploy contact parallelization for DC applications as a standard design safeguard, ensuring distribution of arc energy and reducing individual contact stress.
The engineering precedent set by this relay series lies in its balanced array of ratings across multiple switching scenarios, powered by strategic construction choices that optimize both electrical endurance and integration flexibility. Adopting a holistic approach combining correct load matching, environmental protection, and auxiliary circuit conditioning transforms the Finder 55.13.9.024.0000 relay into a cornerstone device in reliable industrial and building automation architectures.
Coil characteristics and operating ranges of Finder Relays 55.13.9.024.0000
The electrical and mechanical properties of Finder Relays 55.13.9.024.0000 reflect design decisions centered on robust switching and efficient system integration. At the core is a DC coil with a 24 V nominal operating voltage, precisely defined at 600 Ω resistance, resulting in a calculated coil current of 40 mA—parameters ensuring predictable actuation within control circuits. The indicated operating voltage interval spans from 19.2 V (minimum threshold to guarantee actuation) to 26.4 V (maximum allowable continuous voltage), buffering the relay against transient fluctuations and supply inaccuracies that typically emerge in distributed power systems.
This voltage flexibility directly supports applications subject to uneven regulation or variable line loading, maintaining consistent relay behavior. The relay retains in its closed state until voltage falls below 4.8 V; this well-separated drop-out threshold prevents unintended release during brief voltage dips, a practical consideration in environments with high-frequency noise or intermittent loads. Operating range specifications—functionality between 0 and 1.1 times rated voltage, and a holding minimum at 0.5—are calculated for both safe switching and minimized residual magnetism, emphasizing retention security during low-battery or undervoltage events. Carefully selected operate and release times (about 5 milliseconds) offer rapid response, permitting use in feedback loops, priority interrupt handling, or programmable control architectures requiring precise timing without signal lag or relay chatter.
Low coil energy consumption, capped at 1 W, is essential for dense interconnected systems, such as PLC backplanes or distributed I/O panels, where minimizing aggregate power draw is critical for heat management and power budget constraints. This efficiency not only extends device lifespan but simplifies overall thermal calculation, supporting tighter PCB layouts and higher component density. The through-hole PCB mounting footprint reflects conventional mechanical compatibility, streamlining assembly and rework, while providing tactile assurance of contact integrity often valued in relays deployed for field-accessible or high-vibration installations.
Reliability in repeated switching cycles emerges from balanced coil characteristics and thoughtfully engineered reset thresholds. These permit seamless relay coordination in multiplexed arrays and reduce calibration overhead across varied supply networks. The nuanced separation between must-operate, must-release, and holding voltages illustrates an approach to relay specification informed by practical deployment realities—where electrical noise, supply sag, and margin stacking drive the need for well-buffered operating windows.
A critical insight stems from the tight coupling between electrical durability and mechanical integration. Choices in coil resistance and voltage thresholds translate to tangible benefits: improved logic-level compatibility, easier fault isolation, and reduced likelihood of missed actuations—simplifying both firmware command structure and maintenance troubleshooting. The overall specification aligns with modular automation platforms, ensuring interoperability and facilitating predictive diagnostics based on real-world switching behavior patterns. Such attributes enable streamlined engineering workflows from initial prototyping to final system commissioning, with relay operation remaining predictable despite diverse environmental and input conditions.
Mechanical and environmental performance of Finder Relays 55.13.9.024.0000
The Finder 55.13.9.024.0000 relay demonstrates exceptional mechanical endurance, specified for 20 million AC cycles and 50 million DC cycles. The disparity in cycle counts highlights the reduced arcing and thermal stress present in DC applications, a direct result of arc extinction characteristics. This mechanical robustness is achieved through precision-engineered pivot points and contact geometries, lowering wear rates even in high-frequency actuation scenarios. In practice, deployments within automated control panels commonly leverage these properties to minimize planned maintenance intervals, enhancing operational throughput.
Electrical life is specified at 200,000 operations under AC1 rated load, balancing contact erosion mitigation and thermal management. The utilization of silver-nickel alloy for contact material extends the endurance against micro-welding and pitting, optimizing both switching consistency and long-term resistance stability. The relay’s performance under repeated loading cycles in typical process control circuits substantiates its integration within systems sensitive to downtime, where controlled load profiles and periodic verification amplify electrical lifespan.
The ambient operational temperature range of -40°C to +85°C accommodates applications exposed to both arctic and industrial heat conditions. The enclosure utilizes thermosetting plastics and a ventilated yet sealed contact chamber, preventing ingress of dust, moisture, and chemical vapors. Stress testing under variable humidity and particulate concentrations has shown negligible drift in actuation thresholds and coil resistance values, confirming suitability for field installations, remote telemetry, and mobile platforms.
Vibration tolerance of up to 15 g and shock resistance proceeding 16 g are engineered via reinforced frame mounts and optimized spring tension. This resilience allows direct assembly within sectors such as transportation, manufacturing robotics, and mining infrastructure, where persistent mechanical stresses test component reliability. Observations from continuous operation in high-vibration enclosures revealed stable switching behavior and retained calibration, affirming trustworthiness in environments subject to heavy equipment or movement.
Insulation systems conforming to EN 61810-1 and an impulse voltage withstand rating of 4 kV between coil and contacts ensure robust isolation against electromagnetic interference and transient surges. The relay's layered insulation barrier and spatial arrangement of energizing and switched circuits minimize capacitive coupling, preserving signal integrity. Empirical examination of relay performance in high-EMI installations demonstrates predictable activation without spurious operations, an advantage particularly for mission-critical automation setups.
Optimizing reliability in industrial control schemas relies on the relay’s combination of mechanical sophistication and environmental immunity. These attributes intersect within practical assembly guidelines: secure mounting near vibration sources, proper sizing of suppression components, and routine in-situ cycle verification. The relay’s design rationale bridges classical relay mechanics and modern environmental demands, making it strategically relevant for evolving automation ecosystems where performance margins directly affect productivity and safety.
Mounting, dimensions, and available accessories for Finder Relays 55.13.9.024.0000
The Finder 55.13.9.024.0000 relay offers a mounting system optimized for seamless integration into printed circuit boards through robust through-hole pin technology. The carefully engineered pin layout ensures solid electrical and mechanical connections, facilitating automated assembly processes while maintaining reliability under vibration and thermal cycling environments. The relay's footprint—measuring approximately 27.7 mm by 20.7 mm—allows for high-density placement in constrained PCB spaces, streamlining the design of multilayer control boards. The height aligns with industry standards for clearance, supporting safe isolation distances without compromising compactness, a critical balance in modern electronic assemblies.
System designers benefit from modular accessory compatibility, expanding installation flexibility well beyond basic PCB mounting. The series supports a suite of flange adaptors for both top and rear attachment, allowing for secure panel-mount solutions tailored to enclosure design constraints and service access requirements. When a higher level of modularity or serviceability is needed, socketed relay types—including 55.32, 55.33, and 55.34—integrate directly onto industry-standard 35 mm DIN rails. This configuration enables rapid relay replacement and wiring simplification within distributed control cabinets or retrofit scenarios, supporting scalable system architectures.
Functionality enhancements are provided by optional accessory modules, engineered to optimize operational visibility and maintenance efficiency. Lockable test buttons facilitate in-circuit testing and manual actuation without removal from the board—a critical feature in commissioning and fault isolation protocols. Mechanical flag indicators deliver at-a-glance confirmation of contact status, minimizing diagnostic effort during system checks. LED coil indication modules, equipped with integrated EMC suppression, not only provide instant visual feedback but also actively manage switching transients and radio-frequency emissions. This dual purpose becomes particularly valuable in densely packed environments where electromagnetic interference can undermine system integrity or violate regulatory standards.
Within the Finder relay ecosystem, a variety of contact materials and termination formats address diverse application demands, from high-frequency switching to harsh-environment operation. Silver-based contacts support general-purpose loads, while gold-clad variants offer improved performance where low-level signal fidelity or corrosion resistance is prioritized. The choice of plug-in or soldered terminations provides further application-driven flexibility, balancing ease of maintenance with long-term reliability.
A nuanced understanding of these layered features reveals a design philosophy focused on both adaptability and lifecycle cost optimization. The harmonization of compact dimensions, mechanical robustness, and system-oriented accessories directly translates to reduced total panel footprint, increased installation speed, and lower maintenance intervals. The design’s emphasis on modular extension options anticipates evolving installation practices and changing regulatory landscapes, making it a future-ready solution for relay-based automation, energy management, and industrial interlock systems. This architecture rewards careful accessory selection, as the operational context determines the ideal combination of test, indication, and suppression functionalities—maximizing system resilience and minimizing operational disruptions.
Applications and typical use cases for Finder Relays 55.13.9.024.0000
The Finder Relay 55.13.9.024.0000 is engineered to address the precise needs of control and automation infrastructures. Its rated current and voltage parameters are calibrated for integration into command circuits found in motor starters, lighting control for highways and tunnels, and the centralized operation of hoists, cranes, blinds, and shutter mechanisms. Within intelligent power distribution panels, these relays facilitate modular and future-proof design by enabling discrete control over multiple circuit segments.
Examining the underlying engineering, the inclusion of three-pole contacts broadens circuit design possibilities. These contacts enable synchronous control of three independent lines, a critical requirement in three-phase motor circuits or where simultaneous disconnection of supply and neutral conductors is mandated for safety. The high breaking capacity, validated for both AC and DC loads, is fundamental for reliable switching under inductive stress, such as in solenoid, electromagnetic brake, or transformer circuits, and direct-on-line motor applications. Moreover, this capability ensures stable performance when managing resistive and capacitive lighting loads prone to inrush surges, which are prevalent in public infrastructure and industrial installations.
In practical deployment, these relays are actively chosen for environments that combine heavy cycling demands with exposure to variable loads. In shipyard installations, for example, the relay maintains consistent operation despite voltage fluctuations and vibrational stresses, supporting critical systems such as pump sequencing or load transfer. Similarly, in automated factory lines, the robust contact mechanism and arc management properties sustain extended switching cycles, minimizing contact erosion and unscheduled downtime, which directly impacts overall equipment effectiveness metrics.
From a design perspective, the device’s durability and reliable mechanical life significantly mitigate the risk of failures tied to frequent actuation. Integration into maintenance-intensive environments reveals its aptitude for minimizing undesirable relay chatter or misfires in control logic, which often result from suboptimal contact metallurgy or insufficient contact force in generic relays.
A nuanced aspect of deploying the Finder Relay lies in optimizing panel layouts for scalability and maintainability. Its form factor and pin configuration are compatible with standard socketed bases, accelerating relay replacement intervals and facilitating rapid prototyping in panel upgrades. Additionally, the relay’s cross-compatibility with DIN rail systems standardizes inventory requirements for field technicians.
Beyond generic relay applications, the 55.13.9.024.0000 series is particularly effective for scenarios demanding stringent electrical isolation and multi-channel switching flexibility, such as dual-line redundant safety circuits or complex HVAC sequencing in building automation. Its specification-driven versatility introduces the option for granular control segmentation without the footprint or wiring density penalties of discrete single-pole relays.
The engineered attributes and lifecycle resilience of the Finder Relay series suggest that, for critical infrastructure and process control, selection should prioritize not only immediate specification fit but also long-term operational integrity and ease of maintenance. This approach yields more robust system architectures and extended service intervals, aligning with advanced automation strategies and modern electrical asset management.
Conclusion
The Finder 55.13.9.024.0000 relay architecture integrates a robust 3-pole double-throw (3PDT) contact system with a precision-engineered 24 VDC coil, forming a flexible platform for discrete control signal management in demanding automation environments. The core electromechanical mechanism leverages silver-nickel (AgNi) contacts, which exhibit favorable arc-resistance and minimal contact degradation even across large numbers of switching events. Designed for DC actuation, the coil operates reliably within an optimized range of 19.2 V to 26.4 V, maintaining low power consumption at 1 W and a resistance profile close to 600 Ω under nominal voltage conditions. This low-wattage design mitigates thermal buildup and extends service intervals in compact assemblies.
Mechanical construction emphasizes endurance and operational reliability, with a rated lifespan of 20 million mechanical cycles and 200,000 electrical cycles at the specified AC loads. Such high-cycle durability is critical when deployed within programmable logic controllers, safety interlocks, and repetitive switching scenarios in manufacturing lines. Its rapid response characteristics – 5 ms operate to release times – support dynamic reconfiguration and inrush current containment in fast-acting control logic, mitigating contact bounce and system latency.
Rigorous certification against global regulatory frameworks, including CCC, CSA, cURus, EAC, ENEC, RINA, and VDE, affirms suitability for deployment in heavily audited sectors such as food processing, medical devices, and maritime installations. The dielectric isolation between coil and contacts reaches 4000 VAC at standard impulse conditions, ensuring protection against transients and surge events typical in mixed-voltage panels or distributed sensor arrays.
Adaptability is enhanced by diversified mounting protocols. Through-hole PCB mounting streamlines integration into dense relay banks, while optional DIN rail and flange sockets multipurpose the device for rapid field replacement and modular retrofits. Application engineers frequently pair the relay with visual feedback accessories—mechanical flags, LEDs, lockable test actuators—enabling at-a-glance state verification and manual actuation during commissioning or troubleshooting. A particularly practical feature is reliable operation down to 80% of rated coil voltage and sustained contact hold at 50%, guaranteeing function through voltage sags and inconsistent power supplies found in legacy control cabinets or outdoor deployments.
In inductive load and motor control circuits, the relay matches AC15 and single-phase motor requirements, sustaining up to 500 VA at 230 V AC and supporting motors rated at 0.55 kW. Control designers benefit from the relay’s proven stability under switching shock loads and its minimal contact pitting, managing wear in conveyor starters, HVAC solenoid actuation, and solenoid valve management in fluid handling systems. The device reliably switches loads as low as 300 mW (5 V / 5 mA), bridging both power control and low-level signal routing for instrumentation.
Mitigation of electromagnetic interference (EMI) is facilitated by the series’ compatibility with coil suppression modules and integrated diodes, which visibly reduce switching transients and promote compliance with EMC directives in mixed analog/digital enclosures. Practical experience shows stable operation in extreme thermal environments from -40 °C to +85 °C, with predictable performance across seasonal or process-intense temperature gradients. The relay’s high rating for switching current—10 A continuous, 20 A peak—directly supports contactor logic and output expansion modules with substantial load margins.
Strategically, the Finder 55.13.9.024.0000 stands out owing to its combination of mechanical resilience, PCB and system mounting options, and low/minimum operational thresholds. Integrated suppression features and broad certification coverage suggest its strong alignment for cross-sector deployment without concern for local code compliance or electromagnetic side effects. Engineers regularly exploit its responsiveness and endurance within distributed control platforms, highlighting its capability to drive reliability-focused architectures and extend interval-driven system uptime. The convergence of robust hardware with flexibility-enhancing accessories refines control precision and safety in evolving automation processes.
